• Put Samples In Different Locations
  • Put Up Plenty of Color
  • Put Color Where It Will Actually Go
  • Make Lighting Conditions Consistent With The Way They Will Be On A Long-Term Basis
  • Be Sure Your Sample Is Fully Coated.

Juli’s Tips For TESTING COLOR

1. Put samples in different locations

If you are testing more than one color for a given room (or a given surface, on an exterior), put those samples in different locations. It can be the same wall, but skip over 3 feet or so.

Never, ever apply competing colors right next to each other. I can’t tell you how many times I’ve seen this mistake on Pinterest or blogs, including by people who consider themselves home design influencers.


The goal is not to compare two or three potential color choices – a proper color specialist already knows how the colors are different. That’s what the Color Notation data tells us.

Which color is lightest? Which is warmer or cooler? Which has more chroma (perceivable color)?

You sample to ensure you still like the color when you can see more of it under your particular light conditions, and to confirm that it looks pleasing with any major materials in the room, such as tile, countertops, upholstery or cabinets. Or in the case of an exterior color sample, we’re considering how the color blends with a roof, gutter, brick or stone.

2. Put Up Plenty of color

If painting on the wall, I like to see a 2’ or 3’ patch when possible. Even more outside, since you are trying to evaluate against a much larger surface. You need a big enough exterior sample to visually “overwhelm” the existing color scheme, or it will be extremely difficult to judge the new colors.

There are differing schools of thought as to which is the optimal medium for your sample. Personally, I like putting it on the wall at some point, because the texture itself can affect how we view the color. And ultimately, it’s the wall (or cabinet or siding) we are painting, not a posterboard.

In any case, there are three main locations to paint your test color:

On a foamcore board or canvas board

Directly on the wall/trim/siding

Using a repositionable sticker like Swatch Right (hyperlink?)

There’s no law that says you can’t use any 2 or all 3 of these sampling methods. However, it’s not true that white is the best background color against which to evaluate other colors. The best color is Munsell N7 gray, which a color specialist will have.

That said, white is better than bright red or yellow or other high-chroma hues.

4. Put color Where it will actuallY go

This would seem to be obvious, but you’d be surprised.

A wall color goes on the wall. The trim color next to that swatch. Be careful not to paint latex samples on oil-based or bare wood surfaces, however. (regular latex paint doesn’t adhere well to oil) In that instance, a scrap board will do.

If you need to test multiple colors in multiple areas (major renovation or new construction), put each color in its proper room. Do not put small patches of your entire palette of 8 or 10 colors next to each other on a single wall in your den. Yes, I have seen this done. More than once.

If testing exterior colors, mock up a decent section with all relevant colors together. Siding, trim and/or accent. Again, on the actual surface.

If the contractor is doing it, don’t let them paint 3 small stripes together, halfway up the side of a 2- or 3- or 8-story building. This will tell you nothing, except how the colors compare to the pre-primed yellow/orange Hardie siding or other existing material. And who cares, because the point is to paint over all of that!

5. Make the lighting conditions consistent with the way they will be on a long-term basis

If you are planning to change light bulbs, do that before making your final color selections. Bulbs have different color temperatures, from the warm end at 2700k (amber), to the cool end at 6,000k or so (bluer light). I’ve also found the appearance of the bulb varies by brand, even though they may have the same Kelvin number. Experiment with a couple different brands and see what you prefer.

When using LEDs, I personally like the warm or bright white (not daylight) from Sylvania and Ecosmart. They feel more natural to me and easier on the eyes. Again, your preference may be different. If you can’t afford to change all your bulbs at once, at least make them consistent within a given room.

Planning to remove drapes or plantation shutters? Go ahead and take them down, or with shutters, at least open them completely.

If this is an addition or new build, try to remove films from new windows. These are often tinted blue and will skew the light. And for heaven’s sake, peel back brown paper or better yet, don’t wait till painters have masked off all the windows to start testing your colors. If you can’t undo the paper, just open the door for some natural light.

6. Be sure your sample is fully coated

If you can see streaks or the underlying wall color in some places, it needs another coat. You won’t be seeing the true color. I prefer using a mini-roller to apply samples versus a foam brush, which tends to streak the paint.

Even following all these tips, you may sometimes have a hard time judging the new color when testing against a radically different background color. That’s because our eyes are constantly comparing a color to the color it’s against. Further, our eyes tend to exaggerate any difference between those colors.

This phenomenon, called simultaneous contrast, can play various tricks on us. For example, it might make the new color appear blue or purplish (when testing on a yellow or gold wall) or make it seem much lighter than it is (when testing on a very dark wall color). Conversely, a white primed surface will make the new color look darker and brighter than it actually is.

 

This underscores the need for a real color strategist, who will have tools like a colorimeter and can explain the color data, giving you a greater degree of confidence in the new colors you’re exploring.

2 thoughts on “How To Properly Apply Samples For the Best Predictive Results

  1. The Best Benjamin Moore Greige Paint Colors Classic Gray 1548 – LRV 74. This is the color I chose for my home. I painted my downstairs family room that color and it sometimes looks beige and sometimes it looks gray depending on the time of day and light.

    • Hi Natasha,

      Ben Moore 1548 Classic Gray is a color I use frequently. On the LCh color space, it has these characteristics:
      Lightness 88.4 (how light it appears to us, on a scale of 0 for total black and 100 for total white)
      Chroma 4.59 (zero would be totally gray or 100 would be a fully saturated color)
      Hue Angle 98.7 (which part of the color wheel: in this case, it’s from the Yellow family)

      Near-neutral grays from the Yellow family tend to feel warmer than those from higher on the color wheel, which might come from the green or blue family. There are grays from EVERY part of the color wheel. But as the chroma goes very low, it can be difficult to tell by eye which color family the gray belongs to. That’s where color science is useful in helping us determine if a given gray might work in our space.

Leave a Reply to Natasha Cancel Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>